美亚CPC认证标准 CPC认证标准一览表 美国亚马逊CPC认证 亚马逊儿童产品CPC认证标准 ASTM F2050-19 手持式婴儿背袋和旅行  ASTM F833-21 
135 10588 137 
 
 
 
 
 
 
 
 
 
 
 
 
16 CFR Part 1203Bicycle Helmet Safety Standard 
16 CFR Part 1215Infant Bath Seats 
16 CFR Part 1216Infant Walkers 
16 CFR Part 1217Safety Standard for Toddler Beds 
16 CFR Part 1218Safety Standard for Bassinets and Cradles 
16 CFR Part 1219Safety Standard for Full-Size Cribs 
16 CFR Part 1220Safety Standard for Non-Full-Size Cribs 
16 CFR Part 1221Safety Standard for Play Yards 
16 CFR Part 1222Safety Standard for Bedside Sleepers 
16 CFR Part 1223Safety Standard for Infant Swings 
16 CFR Part 1224Safety Standard for Portable Bed RAIls 
16 CFR Part 1225Safety Standard for Hand-Held Infant Carriers 
16 CFR Part 1226Safety Standard for Soft Infant and Toddler Carriers 
16 CFR Part 1227Safety Standard for Carriages and Strollers 
16 CFR Part 1228Safety Standard for Sling Carriers 
16 CFR Part 1229Safety Standard for Infant Bouncer Seats 
16 CFR Part 1230Safety Standard for Frame Child Carriers 
16 CFR Part 1231Safety Standard for High Chairs 
16 CFR Part 1232Safety Standard for Children's Folding Chairs and Stools 
16 CFR Part 1233Safety Standard for Portable Hook-On Chairs 
16 CFR Part 1234Safety Standard for Infant Bath Tubs 
16 CFR Part 1235Safety Standard for Baby Changing Products 
16 CFR Part 1237Safety Standard for Booster Seats 
16 CFR Part 1238Safety Standard for Stationary Activity Centers 
16 CFR Part 1239Safety Standard for Gates and Enclosures 
16 CFR Part 1303Lead Paint Regulation 
16 CFR Part 1500.18Banned toys and other banned articles intended for use by children 
16 CFR Part 1500.19Misbranded toys and other articles intended for use by children 
16 CFR Part 1500.48Technical requirements for determining a sharp point in toys and other articles intended for use by children under 8 years of age 
16 CFR Part 1500.49Technical requirements for determining a sharp metal or glass edge in toys and other articles intended for use by children under 8 years of age 
16 CFR Part 1500.50Test methods for simulating use and abuse of toys and other articles intended for use by children 
16 CFR Part 1500.51Test methods for simulating use and abuse of toys and other articles intended for use by children 18 months of age or less 
16 CFR Part 1500.52Test methods for simulating use and abuse of toys and other articles intended for use by children over 18 but not over 36 months of age 
16 CFR Part 1500.53Test methods for simulating use and abuse of toys and other articles intended for use by children over 36 but not over 96 months of age 
16 CFR Part 1500.82Exemption from full labeling and other requirements 
16 CFR Part 1500.83Exemptions for small packages, minor hazards, and special circumstances 
16 CFR Part 1501Small Parts Regulation 
16 CFR Part 1505Electrically operated toys/articles 
16 CFR Part 1510Rattles 
16 CFR Part 1511Pacifiers 
16 CFR Part 1512Bicycles 
16 CFR Part 1513Children's Bunk Beds 
16 CFR Part 1610Standard for the Flammability of Clothing Textiles 
16 CFR Part 1611Flammability of Vinyl Plastic Film 
16 CFR Part 1615Standard for the Flammability of Children's Sleepwear: Sizes 0 through 6X (FF 3-71) 
16 CFR Part 1616Standard for the Flammability of Children's Sleepwear: Sizes 7 through 14 (FF 5-74) 
16 CFR Part 1630Surface Flammability of Carpets and Rugs 
16 CFR Part 1631Surface Flammability of Small Carpets and Rugs 
16 CFR Part 1632Standard for the Flammability of Mattresses and Mattress Pads (FF 4-72, Amended) 
16 CFR Part 1633Standard for the Flammability (Open Flame) of Mattress Sets 
ANSI C78.377       Electric LamPS – Specifications for the Chromaticity of Solid-State Lighting Products 
AS/NZS 2172-2013Cots for household use- Safety requirements 
ASTM F404-20     Highchairs 
ASTM F406-19     Non-Full-Size Baby Cribs/Play Yards 
ASTM F833-21 Standard Consumer Safety Performance Specification for Carriages and Strollers 
ASTM F963-17-4.3.5.1(2)Surface Coating Materials - Soluble Test for Metals 
ASTM F963-17-4.3.5.2Toy Substrate Materials 
ASTM F963-17-4.3.6Cleanliness of Liquids, Pastes, Putties, Gels, Powders, and Items of Avian Feather Origin 
ASTM F963-17-4.3.7Stuffing Materials 
ASTM F963-17-4.4Electrical/Thermal Energy 
ASTM F963-17-4.5Sound Producing Toys 
ASTM F963-17-4.6Small Objects 
ASTM F963-17-4.7Accessible Edges 
ASTM F963-17-4.8Projections 
ASTM F963-17-4.9Accessible Points 
ASTM F963-17-4.10  Wires or Rods 
ASTM F963-17-4.11  Nails and Fasteners 
ASTM F963-17-4.12  Plastic Film 
ASTM F963-17-4.13  Folding Mechanisms and Hinges 
ASTM F963-17-4.14  Cords, Straps, and Elastics 
ASTM F963-17-4.15  Stability and Overload Requirements 
ASTM F963-17-4.16  Confined Spaces 
ASTM F963-17-4.17  Wheels, Tires, and Axles 
ASTM F963-17-4.18  Holes, Clearances, and Accessibility of Mechanisms 
ASTM F963-17-4.19  Simulated Protective Devices 
ASTM F963-17-4.20.1Pacifiers with Rubber Nipples/Nitrosamine Test 
ASTM F963-17-4.20.2Toy Pacifiers 
ASTM F963-17-4.21  Projectile Toys 
ASTM F963-17-4.22  Teethers and Teething Toys 
ASTM F963-17-4.23.1Rattles with nearly spherical, hemispherical, or circular flared ends 
ASTM F963-17-4.24  Squeeze Toys 
ASTM F963-17-4.25  Battery-Operated Toys 
ASTM F963-17-4.26   Toys Intended to Be Attached to a Crib or Playpen 
ASTM F963-17-4.27 Stuffed and Beanbag-Type Toys 
ASTM F963-17-4.28  Stroller and Carriage Toys 
ASTM F963-17-4.30 Toy Gun Marking 
ASTM F963-17-4.31 Balloons 
ASTM F963-17-4.32 Certain Toys with Nearly Spherical Ends 
ASTM F963-17-4.33 Marbles 
ASTM F963-17-4.34 Balls 
ASTM F963-17-4.35 Pompoms 
ASTM F963-17-4.36 Hemispheric-Shaped Objects 
ASTM F963-17-4.37 Yo-Yo Elastic Tether Toys 
ASTM F963-17-4.38 Magnets 
ASTM F963-17-4.39 Jaw Entrapment in Handles and Steering Wheels 
ASTM F963-17-4.40 Expanding Materials 
ASTM F963-17-4.41 Toy Chests 
ASTM F977-18 Standard Consumer Safety Specification for Infant Walkers 
ASTM F1004-21Expansion Gates and Expandable Enclosures 
ASTM F1163-15Protective Headgear Used in Horse Sports and Horseback Riding 
ASTM F1169-19Full-Size Baby Cribs 
ASTM F1235-18Portable Hook-On Chairs 
ASTM F1427-21Bunk Beds 
ASTM F1447-18Helmets Used in Recreational Bicycling or Roller Skating 
ASTM F1772-17Harnesses for Rescue and Sport Activities 
ASTM F1774-20Climbing and Mountaineering Carabiners 
ASTM F1816-18Drawstrings on Children's Upper Outerwear 
ASTM F1821-19e1Toddler Beds 
ASTM F1898-15Helmets for Non-Motorized Wheeled Vehicle Used by Infants and Toddlers 
ASTM F1917-20e1Infant Bedding and Related Accessories 
ASTM F1967-19Infant Bath Seats 
ASTM F2012-18e1Stationary Activity Centers 
ASTM F2040-18Helmets Used for Recreational Snow Sports 
ASTM F2050-19Hand-Held Infant Carriers 
ASTM F2085-19Portable Bed Rails 
ASTM F2088-21Infant and Cradle Swings 
ASTM F2167-19Infant Bouncer Seats 
ASTM F2194-16e1Bassinets and Cradles 
ASTM F2236-16aSoft Infant and Toddler Carriers 
ASTM F2388-18Baby Changing Products for Domestic Use 
ASTM F2549-14aFrame Child Carriers 
ASTM F2613-21Children's Chairs and Stools 
ASTM F2640-18Booster Seats 
ASTM F2670-18Infant Bathtubs 
ASTM F2906-19Bedside Sleepers 
ASTM F2907-19Sling Carriers 
ASTM F2923-14Consumer Product Safety for Children’s Jewelry 
ASTM F3084-20Infant and Infant/Toddler Rockers 
ASTM F3118- 17aInfant Inclined Sleep Products 
CIE 13.3CRI 
CIE 15Chromaticity coordinates 
CIE 18.2Luminance 
CIE 18.2The basis of physical photometry 
CIE 63Spectral power distribution 
CIE 84General conditions of luminous flux measurement; L2(AP)005 for cone luminous Flux 
CIE 97Lamp survival factor 
CPSC-CH-C1001-09.4Determination of Phthalates 
CPSC-CH-E1001-08Lead in Children's Metal Jewelry; Lead in Children's Metal Products; Lead in Non-Metal Children's Products 
CPSC-CH-E1001-08.1Lead in Children's Metal Jewelry; Lead in Children's Metal Products; Lead in Non-Metal Children's Products 
CPSC-CH-E1001-08.2Lead in Children's Metal Jewelry; Lead in Children's Metal Products; Lead in Non-Metal Children's Products 
CPSC-CH-E1001-08.3Lead in Children's Metal Jewelry; Lead in Children's Metal Products; Lead in Non-Metal Children's Products 
CPSC-CH-E1003-09Lead Paint Regulation 
CPSC-CH-E1003-09.1Lead Paint Regulation 
EN 1130:2019Children's furniture - Cribs - Safety requirements and test methods 
EN 1273-2020Child care articles - Baby walking frames - Safety requirements and test methods 
EN 1888- 1:2018Childcare articles - Wheeled child conveyances - Part 1: Pushchairs and prams 
EN 1888-2:2018Childcare articles - Wheeled child conveyances - Part 2: Pushchairs for children above 15 kg up to 22kg 
EN 1930:2011Child use and care articles - Safety barriers – Safety requirements and test methods 
EN 12221- 
1:2008+A1:2013Child use and care articles - Changing units for domestic use Part 1: Safety requirements 
EN 12221- 
2:2008+A1:2013Child use and care articles - Changing units for d domestic use Part 2: Test methods 
EN 12227:2010Playpens for domestic use - Safety requirements and test methods 
EN 12520:2015Furniture - Strength, durability, and safety - Requirements for domestic seating 
EN 12790:2009Child use and care articles - Reclined cradles 
EN13209- 1:2021Child care articles - Baby carriers - Safety requirements and test methods - Part 1: Framed back carriers 
EN13209-2:2015Child care articles Baby carriers-Safety requirements and test methods Part 2: Soft carrier 
EN 13210- 1:2020Child care articles - Part 1: Children's harnesses, reins -Safety requirements and test methods 
EN 13210-2:2020Child care articles - Part 2: Children's harnesses incorporating backpacks and reins - Safety requirements and test methods 
EN 14036:2003Child use and care articles- Baby bouncers - Safety requirements and test methods 
EN 14988:2017+A1:2020Children's highchairs - Requirements and test methods 
EN 16120:2012+A2:2016Child use and care articles-Chair mounted seat 
EN 16232:2013+A1:2018Child use and care articles-Infant swings 
EN 50294Measurement Method of Total Input Power of Ballast-Lamp Circuits 
IEC 60081Double-capped fluorescent lamps - Performance specifications 
IEC 60529Degrees of protection provided by enclosures (IP Code) 
IEC 60598- 1Luminaires - Part 1: General requirements and tests 
IEC 60598-2-3Luminaires - Part 2-3: Particular requirements -Luminaires for road and street lightings 
IEC 60901Single-capped fluorescent lamps - Performance specifications 
IEC 60921Ballasts for tubular fluorescent lamps - Performance requirements 
IEC 61000-3-2Electromagnetic compatibility (EMC) - Part 3-2: Limits -Limits for harmonic current emissions (equipment input current ≤16 A per phase) 
IEC 61000-3-2Lamp power factor (only for lamps with integrated controlgear) 
IEC 61140Protection against electric shock - Common aspects for installation and equipment 
IEC 61547Equipment for general lighting purposes - EMC immunity requirements 
IEC 61643-11Low-voltage surge protective devices - Part 11: Surge protective devices 
connected to low-voltage power systems - Requirements and test methods 
IEC 62262Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code) 
IEC 62384DC or AC supplied electronic control gear for LED modules - Performance requirements 
IEC 62471Specific effective UV radiant power 
IEC 62612Self-ballasted LED lamps for general lighting services with supply voltages > 50 V – Performance requirements 
IEC 62717LED modules for general lighting - Performance requirements 
IEC 62722-1Luminaire performance - Part 1: General requirements 
IEC 62722-2-1Luminaire performance - Part 2- 1: Particular requirements for LED luminaires 
IEC/TR 61341Method of measurement of centre beam intensity and beam angle(s) of reflector lamps 
IES LM-9Electrical and Photometric Measurements of Fluorescent Lamps 
IES LM-10Photometric Testing of Outdoor Fluorescent Luminaires 
IES LM-41Photometric Testing of Indoor Fluorescent Luminaires 
IES LM-66Electrical and Photometric Measurements of Single-Based Fluorescent Lamps 
IES LM-79Electrical and Photometric Measurements of Solid-State Lighting Products 
IES LM-80Measuring Luminous Flux and Color Maintenance of LED Packages, Arrays and Modules 
IES LM-82Characterization of LED Light Engines and LED Lamps for Electrical and Photometric Properties as a Function of Temperature 
IES LM-84Measuring Luminous Flux and Color Maintenance of LED Lamps, Light Engines, and Luminaires 
IES TM-21Projecting Long Term Lumen Maintenance of LED Light Sources 
IES TM-28Projecting Long-Term Luminous Flux Maintenance of LED Lamps and Luminaries 
ISO 4628-2Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance   — Part 2: Assessment of degree of blistering 
ISO 4628-4Paints and varnishes — Evaluation quantity and size of defects, and of — Part 4: Assessment of degree ofof degradation of coatings — Designation of intensity of uniform changes in appearance   cracking 
ISO 8098:2014Cycles-Safety requirements for bicycles for young children 
ISO 9221-1:2015Furniture - Children's highchairs -Part 1: Safety requirements 
ISO 9221-2:2015Furniture - Children's highchairs -Part 2: Test methods 
ISO 9227Corrosion tests in artificial atMospheres -- Salt spray tests 
ISO 10289Methods for corrosion testing of metallic and other inorganic coatings on   metallic substrates — Rating of test specimens and manufactured articles subjected to corrosion tests 
ISTMTIn-SITU Temperature Measurement Testing (ISTMT) 
L2(AP)005Cone luminous flux 
prEN 13032-4Light and lighting - Measurement and presentation of photometric data of lamps and luminaires Part 4: LED light sources and luminaires 
SASO 2870Energy Efficiency, Functionality and Labeling Requirements for Lighting Products – Part 1 
SASO 2902Energy Efficiency, Functionality and Labelling Requirements for Lighting Products - Part 2 
SASO 2927Energy Efficiency Functionality and Labelling Requirements for Lighting Products - Part 3: Street lighting 
SASO EN 13032-4Light and lighting - Measurement and presentation of photometric data of lamps and luminaires Part 4: LED light sources and luminaires 
SASO GSO IEC 60901Single-capped fluorescent lamps - Performance Standard 
SASO GSO IEC 60969CFLi Performance requirements 
SASO IEC 62554Basics of luminous flux 
SASO IEC/PAS 62707- 1LED - Binning - Part 1: General requirements and white grid 
SASO IEC/PAS 62717LED Modules Performance specifications 
SASO IEC/TS 62504General lighting – LEDs and LED modules – Terms and definitions 
SASO standard to be adopted(Project IEC 62663-2)Non-ballasted LED lamps – Performance Requirements based on 
SOR/2016- 152Cradles and Bassinets Regulations 
SOR/2016- 167Carriages and Strollers Regulations |